Buy Low Price From Here Now
Featuring advanced timings of 5-5-5-15 at a voltage of 2.0-2.1v, this 4GB (2x2GB) PC2-8500 (DDR2-1066) kit provides superior performance for those seeking o get more out of their machines. Using Mushkin's eVCI vapor chamber cooling, these modules provide
Readmore
Technical Details
- 4 GB Dual Kit (2 X 2 GB)- DDR-1066 (PC-8500)
- DDR2 240-PIN DIMM
- 2.0 - 2.1V
- 5-5-5-15
See more technical details
By A. Yüksel (Turkey)
I am using this Rams with mentioned board and E6400(C2D) processor. Because my processor works at 1066mhz fsb i had to use very strange fsb:dram ration to make these modules work at 1066Mhz and i tested them but result wasnt good because fsb(so the north bridge's memory interface) limits memory speed. I wasnt able to reach Jedec standarts which is 8500mb/s. Then I overclocked my processor to 1600Mhz fsb (3.2Ghz cpu speed) and got 400Mhz fsb for north bridge's memory interface. At this fsb, I adjust modules to work at 1000Mhz(1066Mhz is the actual value) with 4:5 fsb:dram ratio. After running some benchmarks I got the Jedec's standarts; actually a bit mmore with ~8600mb/s read rate. Then tried something new and adjusted modules to work at 800Mhz with 1:1 fsb:dram ratio at 4-4-4-12 timings with no extra voltage(2.1V used).I returned to Windows to run benchmarks again. After getting results, i got shocked :| These modules reached 94000mb/s read speeds.
In conclusion, these Ram modules are great but if you are planning to use them make sure that your cpu runs at 1333Mhz fsb. This way ram's speed wont be blocked with cpu's speed and/or north bridge's memory interface speed.
By Patrick W. Yun
Just set up the BIOS settings for the required voltage and you're set!
This thing flies!
Oh and make sure your motherboard can take these.
Images Product
Buy Mushkin Enhanced Blackline Ascent 4 GB Desktop Memory 996619 Now
0 comments:
Post a Comment